Management
Factory Def.
Reset Count
V-Mag
Adjustmnet
Password Settings
New
Password
Retype
Password
CSA6
Displays the default settings for CSA6 (optional) while printing the ID card or name
card.
Item
Mode
Density
Position Adjustment
Vertical
Horizontal
Reset all settings to factory default
values.
Choose to reset count for roller or pad
after replacement. Click [immediate] to
reset count.
Choose to adjust the vertical
magnification rate of the printer.
Enter a password to enable
modifying the web page.
Password should be 8~32
characters or digits in
length.
Retype new password.
Description
Display the default mode. Choice: Up/Down,
left/Right, Front/Rear
Display the default density level. Default: 4
(range 1 ~ 7)
Adjust the printing position for your ID card.
Choice: Move Up, Move Down (range: 0~177)
Choice: Move right, Move left (range: 0~107)
37
Customizing the Product's Settings
Tray 1 pad/
Manual Tray Pad
-0.4%/-0.2%/*
0%/+0.2%/
+0.4 %