Playing Ipod; Charging Ipod Battery Using The Dock - Philips MCM398D/12 User Manual

Dock

Playing iPod

1
Select the dock adaptor of the correct type, and
snap it into the dock (See "Dock adaptor").
2
Correctly place your iPod in the dock.
3
Connect the cables of the dock to DOCK IN
jacks on the main set correspondingly.
4
Press SOURCE repeatedly or iPod to select
iPod source.
●
The connected player will play automatically.
Notes:
– By using the buttons ( 2; , ¡1, 2™ and
VOLUME ) on the MCM398D and its remote
control, the following iPod playback features are
available: Play/Pause, selecting next/previous track,
fast forwarding/rewinding and changing volume.
– The buttons ( 3/4, OK and DISPLAY/
MENU) on the MCM398D and its remote control
can work only with playback of the audio contents
stored on the docked player.
– Stop (Ç) function of disc playback is not
available to the docked player.
Charging iPod battery using the
dock
Docking your iPod and connecting the dock to
MCM398D, you can charge the iPod in the
standby mode and power-on mode of
MCM398D.
Notes:
– In Eco power standby mode, iPod cannot be
charged.
– When the set is switched to the dock mode, if no
player is plugged in for 15 minutes, the set will
switch to the standby mode.
22