Preparations; Rear Connections; Power; Antennas Connection - Philips MCM398D/12 User Manual

FM wire antenna
Speaker
(right)

Rear connections

The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A

Power

●
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change connections with
the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
AC power cord
DOCK IN
B
Antenna Connection
Connect the supplied FM antenna to the FM
AERIAL terminal. Adjust the position of the
antenna for optimal reception.
FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
C

Speakers Connection

Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-".
1

Preparations

Speaker
(left)
2
9