Ipod Dock; Compatible Ipod Players; Selecting The Correct Dock Adaptor; Setup - Philips BTM630V37 Manual

Compatible iPod players

●
Most Apple iPod models with 30-pin dock
connectors as follows: 20GB, 40GB, 20/30GB
Photo, 40/60GB Photo, 30GB Video, 60GB Video,
80GB Video, Mini, Nano and Nano 2nd
generation.
Selecting the correct dock
adaptor
●
8 iPod dock adaptors of different type, as
indicated at the back of the adaptor, are included
to fit the following iPod:
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,
30GB Video, 60GB Video, 80GB Video, Mini,
Nano and Nano 2nd generation.

Setup

●
Insert a dock adapter corresponding to the
portable player you use.
2
1 1
●
To connect with a different iPod portable player,
pop up the corresponding dock adapter and
replace with a new one of the matching type.
pg001-034_BTM630_37-Eng

Playing an iPod portable player

1
Correctly dock your iPod por table player in the
cradle. Make sure the dock adaptor is
compatible.
●
Make sure that you have powered on your iPod
player before selecting DOCK source.
➜
On the display, "iPod" is displayed if iPod is
connected.
2
Press SOURCE on the system repeatedly or
iPod on the remote control to select iPod
source.
3
Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward, menu selection) during
playback.
Charging iPod battery using the
dock
●
In DOCK mode, directly dock your iPod
portable player on the cradle for charging.
Note:
– For the purpose of SAVING POWER, recharging
of your iPod or USB device is NOT SUPPORTED
when the main set is in the ECO POWER
STANDBY MODE.
25

iPod Dock

2007.6.14, 17:15
25