Finding A Passage Within A Track; Selecting A Desired Album/Track (Mp3/Wma Disc Only); Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks - Philips MCM398D/12 User Manual

Finding a passage within a track

1
Press and hold down on TUNING S / T
(or on the remote control).
S/T
➜
The disc is played at high speed.
2
When you recognize the passage you want,
release TUNING S / T (or
the remote control).
➜
Normal playback continues.
Selecting a desired album/track
(MP3/WMA disc only)
To select a desired album
● Press ALBUM/PRESET 4 / 3 (or ALB +/-
on the remote control) repeatedly.
To select a desired track
● Press TUNING S / T (or
the remote control) repeatedly.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press REPEAT/SHUFFLE on the remote
control to select :
➜
SHUF – tracks of the entire disc/
programme are played in random order.
➜
SHUF REP ALL – to repeat the entire
disc/ programme continuously in random order.
➜
REP ALL – to repeat the entire disc/
programme.
➜
REP – to repeat the current track.
2
To return to normal playback, press REPEAT/
SHUFFLE until the various SHUFFLE/REPEAT
modes are no longer displayed.
● You can also press 9 to cancel your play mode.
Note:
– If Shuffle is activated on an MP3-CD, all titles
stored in the disc will be played in random order.
CD/MP3/WMA Operations

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1
Press PROG on the remote control to enter
the programming mode.
S/T on
➜
2
Press TUNING S / T (or
the remote control) repeatedly to select your
desired track number.
● For MP3 disc, press ALBUM/PRESET 4 / 3
(or ALB +/- on the remote control) and
TUNING S / T (or
remote control) to select the desired album and
track for programming.
3
Press PROG to confirm the track number to be
stored.
on
S/T
4
Repeat steps 2-3 to select and store all desired
tracks.
5
To start playback of your disc programme, press
Ç followed byÉÅ.
●
If you attempt to programme more than
20 tracks, "FULL" will appear on the
display. In this case :
➜
automatically.
➜
programmed tracks.
➜
the programmed tracks.

Reviewing the programme

In stop mode, press and hold PROG until the
display shows all your stored track numbers in
sequence.

Erasing the programme

●
Press Ç once when playback is stopped or
twice during playback.
➜
A track number is shown and PROG flashes.
The system will exit programming mode
Pressing Ç button will erase all the
Pressing ÉÅ button will start playback of
PROG disappears and "CLEAR" is displayed.
on
S/T
on the
S/T
15