Controls; Controls On The System And Remote Control - Philips MCM398D/12 User Manual

#
4
™
!
≤
6
∞
§
•
Controls on the system and
remote control
1
Eco Power/STANDBY-ON y
– to switch the system on or to Eco Power
standby mode.
2
Display screen
– to view the current status of the system.
3
DISPLAY
– to display track information during playback.
4
PROG
for CD/MP3/WMA/USB
................................. to programme disc tracks.
for FM .................. to programme preset radio
stations.
5
Clock/RDS
for FM .................. to activate RDS news.
for clock.............. to set the clock funciton.

Controls

(main set illustrations on page 3)
TUNING S/T
6
for CD/MP3/WMA/USB/iPod
................................. to select a desired track.
................................. (press and hold) to search
£
for FM .................. to tune to a lower or higher
5
¡
ALBUM/PRESET 43
7
0
for MP3/WMA/USB
................................. to select previous/next album.
6
for FM .................. to select a preset radio station.
9
8
≤
for CD/MP3/WMA/USB
)
................................. to stop playback or to clear a
9
@
9
ÉÅ
for CD/MP3/WMA/USB/iPod
8
................................. to star t or interrupt playback.
0
DBB (Dynamic Bass Boost)
– to enhance the bass.
!
DSC (Digital Sound Control)
– to select the desired sound effect : POP, JAZZ,
CLASSIC or ROCK.
@
VOLUME - / + (VOL + / -)
– to increase or decrease the volume.
– to adjust the hours and minutes for the clock/
timer functions.
#
SOURCE
– to select the respective sound source : CD, iPod,
FM, USB/AUX.
$
Disc tray
%
iR sensor
– infrared sensor for remote control.
^ OPEN/CLOSE 0
– to open or close the disc tray.
& n
– plugs in a headphone.
*
AUX
– to connect an auxiliary device.
(
USB DIRECT
– jack for the external USB mass storage device.
backward/forward.
radio frequency.
programme.
11