Viewing Results On Afit - Bosch CH-47976 User Manual

Viewing Test Results
Injector Test
Run New Test
View Test Results
Upload Test
Results

Viewing Results on AFIT

You can view the results of the last completed test by navigating to, and selecting, View Test
Results. Press UP or DOWN to scroll through the following results:
• Injector Balance Graph—displayed in a +/- percent of average flow of injectors, this
screen shows the flow of each injector relative to the other injectors in a bar graph format.
If there is a recommended tolerance, it is shown as a horizontal dotted line. If any injector
exceeds the tolerance, consult the vehicle's Service Information/Shop Manual for servicing
procedures.
• Injector Balance Table—displayed in a +/- percent of average flow of injectors, this
screen shows the flow of each injector relative to the other injectors in a table format.
• Injector Flow Graph—displayed in unit flow per second (UF/s), this screen shows the "unit
flow" of each injector in a bar graph format. This value is an indicator of the actual flow of the
individual injectors for this vehicle.
• Injector Flow Table—displayed in unit flow per second (UF/s), this screen shows the "unit
flow" of each injector in a table format.
• Vehicle Information—displays information on the last vehicle tested, such as the year,
model, body VIN, etc.
Note: When using a direct connection, the Injector Locator can be used to physically locate the
injector associated with the test results.
30 Active Fuel Injector Tester User Guide
Main Menu
Pressure Test Leak Down Test Vehicle Selection Utility Functions