Planet ATA-150 Series Quick Installation Quide page 6

STEP 1: Connecting Telephone
Using a telephone cable, connect
l
your telephone to the Phone port of
the Phone Adapter.
Step 2: Connecting Network and
Power AC Power
Connect the included Ethernet
l
network cable to the LAN port of the
Phone Adapter.
Connect the included power adapter
l
to the POWER port of the Phone
Adapter.
The PWR, LNK/ACT, and RING LEDs
l
will be solidly lit when the Phone
Adapter is ready for use.
Step 3: Basic Configuration & Administration Interface
Using for soft utility to search SIP ATA from current network.
l
The utility not only easy-to-use and provides user more
convenience for configuration access, at the some time if you
forget this IP address can also found that via the utility.
1-2