Table of Contents
Advertisement
•
[LT/RT] - For surround sound output
through two speakers.
•
[Stereo] - For stereo output.
•
[
VS Wide] - Dolby Virtual Speaker
option for small space.
•
[
VS Reference] - Dolby Virtual Speaker
option for spacious room.
[HDMI Audio]
Select the HDMI audio setting when you
connect this product and the TV with an
HDMI cable.
•
[On] - Allow audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
•
[Off] - Disable audio output from the
TV. The sound is only output through the
speaker system.
[Audio Sync]
Set the delay time for audio output when you
play a video disc.
1
Press OK.
2
Press
/
to set the delay time.
3
Press OK to confi rm and exit.
[Sound Mode]
Selects a preset sound effect to enhance the
audio output.
•
[3D] – Set the 3D processing output
mode.
•
[Movie Mode] – Select a sound effect for
movies.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – Enjoy quiet viewing at night.
•
[Off] – Enjoy surround sound with a full
dynamic range.
22
EN
Note
•
Applicable only to Dolby Digital encoded
DVD.
Video setup
1
Press SYSTEM MENU.
» [General Setup] menu is displayed.
2
Press
to select [Video Setup], then
press
.
3
Select an option, then press OK.
4
Select a setting, then press OK.
•
To return to the previous menu,
press
.
•
To exit the menu, press
MENU.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL] - For PAL-system TV.
•
[Multi] - For TV that is compatible with
both PAL and NTSC.
•
[NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
SYSTEM
Hide quick links:
Advertisement
Table of Contents
