Where Do I Start? Installing - Whirlpool WVU27D1 Manual

Where do I start?
2
INSTALLING
Excessive Weight Hazard
Use two or more people to move
and install the freezer.
Failure to do so can result in back
or other injury.
Before turning on:
emove base from packaging.
R
Remove wedges and tapes from the
internal components.
Clean your product inside with a
soft cloth or sponge, lukewarm
water and mild soap.
Do not use sharp objects, alcohol,
flammable products or abrasive
cleaners. They can damage the
painting of your freezer and/or
refrigerant circuit.
Do not place nor use electrical
apparatuses within the product.
Electrical Shock Hazard
Connect the ground wire to an
effective ground.
Do not remove ground wire.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire or electrical shock.
Check if the voltage
supplied is the same
as that on the tag
attached near the
plug. The freezer
shall be connected to
a good wall outlet.
Important:
Never connect your freezer to
double or triple extension
cords together with another
appliance in the same wall
outlet. Do not use an extension
cord. That may overload power
supply, impairing the
operation of your
freezer, and
resulting in
fire accidents.
Use an exclusive
wall outlet only.
In case of voltage oscillation,
install an automatic voltage
stabilizer with power output of
at least 1000W between the
freezer and the wall outlet.
If the power supply cord is
damaged, it must be replaced
by one of the same type or by
a special set provided by the
manufacturer or its authorized
technical service.
Power supply of your residence:
The electric wires of your residence
shall be of copper and have minimum
sections of 2.5mm
Ground wire (grounding):
For your safety, properly connect the
freezer ground wire (green wire
behind the product). Improper
connection of the ground
2 .