Where To Start? ✔ Installing - Whirlpool 260/300 Manual

Where to Start?
2
INSTALLING
Excessive Weight Injury Harzard
Use two or more people to move
and install the freezer.
Failure to do so can result in back
or other injury.
Before turning on:
✔
Remove base from packaging.
Remove wedges and tapes from the
internal components.
✔
Clean your product inside with a
soft cloth or sponge, lukewarm
water and mild soap.
✔
Do not use sharp objects or any
other item in an attempt to speed up
the defreezing process.
Do not use alcohol, flammable
products or abrasive cleaners.
They can damage the painting of
your freezer and/or refrigerant circuit.
✔
Do not damage the refrigerant circuit.
✔
Do not place nor use electrical
apparatuses within the product.
Electrical Shock Hazard
Connect the ground wire to an
effective ground.
Do not remove ground wire.
Do not use an adapter (
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire or electrical shock.
( * ) Except by adaptors certified by the
Ground wire (grounding):
✔
Grounding is necessary in any
voltage (127 or 220V), and for any
electric electronic appliance. The
grounding wire shall not be
connected to the neutral conductor
of the power system, nor to cable
tubing, gas or water pipes, taps or
faucets.
When grounding, follow the
grounding standards in force and
call an authorized electrician.
The incorrect installation of the
ground wire might result in
accidents such as fire, electrical
shock or other personal injuries.
✔
Check if the voltage supplied is the
same as that on the tag
attached near the power
supply cord plug. The
freezer shall be
connected to a good
wall outlet.
Important:
✔
).
*
✔
manufacturer of this appliance and
provided by authorized dealer.
Never connect your freezer to
double or triple extension cords
together with another appliance
in the same wall outlet.
Do not use an extension cord.
That may overload power
supply, impairing the
operation of your
freezer, and
resulting in fire
accidents. Use an
exclusive wall outlet
only.
In case of voltage oscillation,
install an automatic voltage
stabilizer with power output of
at least 1000W between the
freezer and the wall outlet.