Leitner SmartSet 370 Quick Start Manual

Headset Jack Installation – Quick Start Guide
Does
right place. If not, flip this guide over for installation instructions
1
Plug one end of the green cord into the green
telephone connector jack on the back of your
Leitner base
3
Ensure the Compatibility Switch is set correctly
(most phones use setting 1). You can always call
us to get the correct setting for your phone
Questions? Just want to see if your speaking volume is loud and clear? We're happy to help!
Call us at 1-800-432-3738, Monday through Friday 6am–4:30pm Pacific Time, for FREE lifetime support
your office phone have a headset button? If so, you're in the
2
Plug the other end of the green cord into the
headset jack of your phone. If you don't have a
headset jack, go to Step 1 on the reverse side
4
Plug the AC adapter into your base and gently
pull out the tab from your headset to activate
the battery. Set your headset in the base and let
it charge for at least 4 hours before using