Presetting Radio Stations; Automatic Preset Programming; Manual Preset Programming - Philips MZ-1200/22 Owner's Manual

Presetting radio stations

You can preset up to 40 radio stations in the
memory.
IMPORTANT!
When "P" appears on the display, it only
enables preset number selection.
Press É Å to toggle between frequency
tuning and preset number selection.
ö Automatic preset programming
It enables you to programme all available radio
stations automatically from a selected preset
number, starting from FM and followed by MW
band.
If no preset number is shown, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Note:
– If a radio station has been stored in one of the
presets, it will not be stored again under another
preset number.
To exit programming mode
Press PROGRAM or Ç.
ö Manual preset programming
It enables you to programme only the favourite
radio stations.
Hold down S T for fast tuning, release it
when the frequency indication starts to change.
For tuning to a weak reception radio station,
press S T briefly and repeatedly.
Repeat the steps again to store other radio
stations.
Notes:
– If you attempt to programme more than 40
preset radio stations, "PROGRAM FULL" is
displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the programme
mode automatically.
To exit without storing the preset setting
Press Ç.
Radio Reception
In tuner mode,
99 80 /
P 01
make sure "P" select a preset
appears, if not
number
pressÉÅ .
In tuner mode,
PROG
99 80
P 01
PROG
99 80
P 01
store setting and exit
programming mode
press and hold
until "AUTO"
appears
/
tune to a radio
station
/
select a preset
number
13
3139 115 21642