Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MC-220/25 User Manual

STANDBY-ON PROGRAM TIMER
ON
OFF
SOURCE
SELECT
RECORD PLAY•PAUSE STOP
PREV NEXT iR

Setting the clock

There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
1
Tune to a RDS station (see "Radio Reception").
2
Press CLOCK for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press CLOCK.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press CLOCK to confirm the time.
RDS REPEAT SHUFFLE
REV
CLOCK MODE SIDE A/B
BAND

Setting the timer

G The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
G You can also use it to record a favourite tuner
programme at a set period (see "Recording
timer")
G During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
2
Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE or
REC TUNER.
3
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
is shown. Display sequence scrolls SET ON
TIME and
flashes. The clock digits for the
TIMER
hours flash.
4
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
G In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows
TIMER
disappears if deactivated.

Clock/Timer

TUNER
or
CD TUNER
if activated, and
19