Synchro Start Cd Recording; Recording From The Radio; Recording From The Aux; Recording Timer - Philips MC-320/25 User Manual

Synchro start CD recording

1
Select CD source.
2
Insert a disc and if desired, program track
numbers.
3
Press to open the tape door.
4
Insert a suitable tape into the deck and close the
tape door.
5
Press REC to start recording.
➜ REC is shown during recording.
➜ Playing of the CD program starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
To stop recording, press STOP 9.
6

Recording from the radio

1
Select TUNER SOURCE and tune to the
desired radio station (see "Tuning to radio
stations").
2
Press to open the tape door.
3
Insert a suitable tape into the deck and close the
tape door.
4
Press REC to start recording.
➜ REC is shown during recording.
To stop recording, press STOP 9.
5
Recording from Aux
1
Select AUX source.
2
If necessary, prepare the additional appliance for
recording.
3
Press REC to start recording.
➜ REC is shown during recording.
To stop recording, press STOP 9.
4
Tape Operation / Recording

Recording timer

To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Insert a suitable tape into the deck.
➜ If desired, press PROG / REV to select tape
reverse mode option.
PLAY 1 SIDE
PLAY A AND B
REPEAT A AND B : for recording on both sides
2
Select TUNER SOURCE and the preset radio
station to record from.
3
Press STANDBY ON to switch the system to
standby mode. Press TIMER SET /
than 2 seconds.
➜
flashes and a source is displayed.
4
Press SOURCE repeatedly or press VOLUME
–/+ until REC TUN source is displayed.
5
Press TIMER SET /
➜ SET ON TIME is displayed,
digits for the hours flash.
6
Press VOLUME –/+ to set the hours.
7
Press TIMER SET /
➜ The clock digits for the minutes flash.
8
Press VOLUME –/+ to set the minutes.
9
Press TIMER SET /
time.
➜ SET OFF TIME is displayed,
clock digits for the hours flash.
10
Repeat steps 6-8 to set the finish time.
11
Press TIMER SET /
settings.
➜
is shown and the recording timer is now
set.
: for recording one side only
: for recording on both sides
for more
to confirm the source.
and the clock
again.
to confirm the ON start
and the
to confirm the timer
17