Compactflash Port - PE micro Cyclone for STMicro User Manual

CYCLONE FOR STMICRO
Figure 3-23: Jumper Settings For Power IN Jack And Debug Connector TVCC Pin
Jumpers 1, 3, and 5 are enabled. Jumpers 2 and 4 are left open.
3.15.5 Target Powered Independently Of Cyclone for STMicro
A target may be powered independently of the Cyclone for STMicro. The user
should remove all jumpers on the Cyclone for STMicro except jumper 5 if they
elect to provide a separate power source for the target.
3.16

CompactFlash Port

The CompactFlash port can be activated by purchasing a CompactFlash
Activation License from P&E. The CompactFlash port accepts Type I
CompactFlash cards. This allows the user to store programming images that
are, individually or collectively, larger than the Cyclone for STMicro's internal
memory (7MB). It also makes swapping programming images much more
quick and convenient. A 2GB CompactFlash card is available separately or as
part of a CompactFlash activation package.
Purchase of the CompactFlash activation license unlocks the CompactFlash
panels in the included Manage Images utility. Programming images may then
be managed on the CompactFlash in exactly the same way as they are in the
Cyclone's internal memory. Please see Section 5.2 - Manage Multiple SAP
Images for more information about using the Manage Images utility.
22 Cyclone for STMicro - User Manual