360 Vision Predator Hybrid PREDHYB-PSU-SM Installation & Configuration Manual page 38

Predator Hybrid Installation Manual V2.1.25
• Force Day Settings - Used to force camera to day/light settings.
• Disable Forced Settings - Switch off forced settings, camera to use settings as per light level.
• Force Mono Settings - Force camera into mono, no lamps, ambient focus range.
• Force HLC On - Switch on HLC option.
• Force HLC Off - Switch off HLC option.
• Iris Open - Opens the camera iris.
• Iris Close - Closes the camera iris.
• Iris Auto - Switches on auto iris.
• Iris Manual - Sets camera to manual iris mode.
• Power Low - Sets the motors to use low power.
• Power On - Sets the motors to use full power.
• ONVIF Token - Used to alter the name of the ONVIF Auxiliary token.
Dark relates to when the camera is in dark mode, see section Camera - Night Changeover - page 31.
Force ONVIF Version Configuration
• Reported Version - Can be used to change the ONVIF version reported by the camera to the VMS,
options are:- Default - ONVIF 2.40, V2.02, V2.20 & V2.40. OK setting and then re-boot camera from
web page to apply.
• Preset Token Format - Default (Used on certain VMS servers. Uses mix of text and 'P' zero-pad
number as preset tokens). Number only (Used on certain VMS servers. Uses numbers as preset
tokens). 'P' zero-pad number (Used on certain VMS servers. Uses P001 to P360 as preset tokens).
• Authorisation Elevation - Used on Vicon VMS, allows the anonymous user to be set as admin, viewer
or operator.
• Pan/Tilt position Range -
the angular position to suit the VMS ONVIF position.
• Advertise Multicast - Option no longer required. When Multicast is enabled in Advanced Video page,
the stream will be advertised.
• Auxiliary Functions - Used to set how the VMS will see the ONVIF Auxiliary Token.
Configurable - Aux 1 - 8, configurable via web page
Standard - Standard ONVIF
Additional - Additional control commands using the ONVIF Standard
• Pre-defined Presets
Advertise All - Show all pre-defined presets, when the VMS requests the presets from the camera.
Advertise Re-definable - Show re-definable pre-defined presets only e.g. Home
Omit - Do not show the pre-defined presets, when the VMS requests the presets from the camera.
• Iris Scale - Used on certain VMS systems, options are position or attenuation (dB).
Used on VMS systems that use specific pan and tilt operation, used to set
OK to apply the new settings into the Predator.
Cancel to abandon the changes to the interface settings.
© 360 Vision Technology Ltd.
Page 38