Table of Contents
Advertisement
Predator Hybrid Installation Manual V2.1.25
Night 1
•
Col/Mono Level - Col/Mono level settings can be changed to suit the site requirements. Options are
dark, medium and light. Default is dark. This sets when the camera goes into 'night mode'.
•
Mono On - Range is 7 to 25. A lower value will set the level on when the scene is brighter, a higher
value will set the level on when the scene is darker.
•
Mono Off - Range is 1 to 20. A lower value will set the level off when the scene is brighter, a higher
value will set the level off when the scene is darker.
•
Bright Control - Options are automatic or normal activation.
Night 2
•
Illumination - When the camera goes into dark mode, what illumination is required. Options are none,
IR and White Light. Please note illumination type will only work if the camera has this option fitted to
the camera. Default is None.
•
Lamp Intensity - Choose lamp intensity, options 100%, 80%, 60%, 40% and 20%. Default is 100%.
•
Camera - Choose when the camera goes into dark mode, what the image will be. Options are mono
or colour.
•
External Lighting - Sets how the camera will focus (when in mono) to suit the light source in the
scene. If this is set incorrectly the image may not be in focus.
•
Aperture - Can be used to increase the picture detail. Default is 3.
•
Noise Reduction - Used to reduce noise with scenes of low illumination. NR must be set to suit the
environment. Default is 1.
•
Low Light Focus - This can be set to on or off. When it is set to low the method used to focus the
camera is suited to low light conditions. Default is on.
•
Night Presets -This can be used to set the presets to different settings if required.
Lamps
Offers more camera options.
Lamps 1
•
White Lamps - Set if white lights are to be used.
•
White When Alarm - Set if white lights are to be used if an alarm is triggered. This feature works with
360 Standalone alarmcard or 360 Vision Matrix only.
•
White Timeout - Use if a white light timer is required. Default is on.
•
White Timeout (m) - Set white light timer, for automatic switch off.
•
Auto Dimming - When selected the camera will reduce the lamp power, when looking in scenes
where there is too much light.
•
FV White Lights - Used when using Forward Vision protocol, can be used to select what lamps are
controlled from the lamp command.
•
Power on Park - When the camera powers up, it will go to a preset position. Preset 150. Default is off.
Lamps 2
•
Low Light Angle - Sets angle when reduced illumination intensity is used.
•
Low Light Value - Sets illumination intensity.
•
White Exclusion - Option to be used if a white light exclusion area is to be used, set area using
presets 151 (left) & 152 (right).
•
IR Exclusion - Option to be used if a infra red light exclusion area is to be used, set area using
presets 153 (left) & 154 (right).
Predator lamps are used to improve the illumination of distant dark objects. The Predator lamps are normally
set to maximum intensity to increase the distance at which objects can be seen. When the Predator lamps
are ON and the camera tilts downwards to view nearby objects, the illumination could be too bright. This could
cause the quality of the image to be reduced. Some Predators include the 'intelligent lighting' feature which
allows the intensity of the illumination to be reduced when the Predator tilts down below a particular angle (i.e.
the 'Low Light Angle'). Below this angle the power to the lamps is reduced to the percentage value that has
been set (i.e. 'Low Lights Value').
© 360 Vision Technology Ltd.
Page 17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Predator Hybrid PREDHYB-PSU-SM and is the answer not in the manual?
Questions and answers