IDEAL PRO Series Installation And Servicing page 31

Table of Contents

Advertisement

Water Savings
Water Related Costs Can Be Reduced By Good Plumbing Practice
2 tap
half open
Unregulated
Vast quantities of water are needlessly run off to waste due to Taps, Mixers and Showers
discharging flow rates far in excess of the rates required for them to perform their duties.
The contrasting flow rates shown on this leaflet clearly illustrate the savings that can
be made whilst still providing a good performance.
British made Aquaflow Regulators provide constant flow rates by automatically
compensating for supply pressure changes between 1 bar & 10 bars.
To facilitate installation into the wide range of plumbing equipment which is
encountered in the U.K, Four Fixing Options are available:-
Options For Showers
1. MXF "DW" Range - For fitting behind Fixed Shower Heads or onto Flexible Hoses
for Handshowers (preferably onto the inlet end when lightweight hoses are used).
2. Compression Fitting Range. "In Line" regulators as in Option 4 for Taps & Mixers.
AQUAFLOW REGULATORS LTD
Haywood House, 40 New Road, Stourbridge, West Midlands DY8 1PA
TELEPHONE (01384) 442611 FAX: (01384) 442612
Over
20 l/m
Fitted with regulator
Unregulated
25 - 30 l/m
Information by courtesy of
5, 6 or
8 l/m
TAPS & MIXERS
4 Fixing Options For Taps & Mixers
1. MK Range - Combined Regulators & Aerator
2. MR05-T Range - Internal Regulators. Push-
Regulated
10 - 12 l/m
3. MXF Standard Range - Screw on tail
SHOWERS
4. Compression Fitting Range - "In Line"
Page 31
APPENDIX
2
1
2
for screwing onto Taps & Mixers with internal
or external threads on their noses. Anti Vandal
models also available.
fit into Tap or Mixer seats. Produced in
three sizes - 12.5mm (BS1010), 12mm &
10mm, Flangeless models also available for
Taps with Low Lift washers.
models for Taps & Mixers. Fix onto the tails
before fitting the tap connectors. Available
in 3/8", 1/2", 3/4" and 1" BSP.
regulators housed in 15mm & 22mm CXC
Couplers & Isolating Valves. " "UK WFBS listed
by the Water Research Centre. Isolation valves
available for slotted screwdriver operation or
with coloured plastic handles. Now available
also in plastic bodied push-fit couplers &
valves.
3
3
1
4
APPENDIX A
1
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents