Table of Contents
Advertisement
Tuning to radio stations
1
Press SOURCE on the set repeatedly or
TUNER on the remote to select FM tuner
source.
2
Press and hold TUNING 22/33 (2/3 on
the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING 22/
33 (2/3 on the remote control) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Press PROGRAM for more than three seconds
to activate programming.
➜
All available stations are programmed.
➜
AUTO is displayed and available stations are
programmed in order of waveband.
Manual programming
1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROGRAM to activate programming.
➜
PROG flashes on the display.
3
Press PRESETí/ë to allocate a number
from 1 to 20 to this station.
4
Press PROGRAM again to confirm the setting.
➜
PROG disappears.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press PRESETí/ë until the desired preset
station is displayed.
Radio Reception
RDS
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
station name are displayed.
Scrolling through different RDS
information
●
Press RDS on the remote control briefly and
repeatedly to scroll through the following
information (if available):
– Station name
– RDS clock
– Programme type such as NEWS, SPORT,
POP M ...
– Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1
Tune to a RDS station from FM band (refer to
"Tuning to radio stations").
2
Press RDS on the remote control.
➜
"RDS 00: OO" appears..
➜
If the RDS station does not transmit RDS
time, "RDS CLOCK" appears.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
and the
25
Advertisement
Table of Contents
