To Deactivate Progressive Manually; Step 4: Setting Language Preference - Philips MCD289/05 User Manual

Preparations
7
Select "TV MODE" to "P-SCAN", then OK to
confirm.
➜
The instruction menu appears on the TV.
8
Press 2/3 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9
Turn on your TV progressive scan mode (refer to
your TV user manual).
➜
The below menu appears on the TV.
0
Press 2/3 to highlight OK in the menu and
press OK to confirm.
➜
The setup is complete now and you can star t
enjoy the high quality picture.

To deactivate Progressive manually

●
When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1
Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
18
2
Press SYSTEM MENU on the remote to exit
the system menu and then DISC and "1" to exit
progressive scan.
➜
The DVD blue background screen will appear.
Step 4: Setting language
preference
1
In stop mode or during playback, press
SYSTEM MENU.
2
Press 2/3/5/4 on the remote control to select
your preferred option.
➜
Move to GENERAL SETUP PAGE or
PREFERENCE PAGE and press 4.
➜ Move to one of the following and press 3.
OSD LANGUAGE (On-Screen Display)
Switches the display language on the TV screen.
Select the language from the displayed list.
AUDIO (DVD only)
Switches the display language of the sound track.
Select the language from the displayed list.
SUBTITLE (DVD only)
Switches the display language of the subtitle.
Select the language from the displayed list.
DISC MENU (DVD only)
Select the language for the DVD menu.
When the selected language is not recorded in
the DVD, one of the recorded languages will be
selected automatically (except for OSD).
You can reset all the DVD settings except for
Rating.
If the language selected is not available on the
disc, the original language designated by each
disc will be selected.
3
Press 5/4 to select a language and press OK.
4
Repeat steps 2~3 for other settings.
To exit the menu
Press SYSTEM MENU again.