Table of Contents
Advertisement
Switching the system on/off
●
Press ECO POWER/STANDBY-ON B
(STANDBY-ON B on the remote control).
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press DISC, TUNER, USB or AUX on the
remote.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press ECO POWER/STANDBY-ON B
(STANDBY-ON B on the remote control).
➜
The interactive sound settings, last selected
source and tuner presets will be retained in the
player's memory.
Switching the system to Eco
Power Standby mode
●
Press ECO POWER/STANDBY-ON B in
the active mode.
➜
The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
●
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
●
If the system is normal standby with clock display,
press and hold ECO POWER/STANDBY-
ON B for 3 seconds or more to switch to Eco
power standby or vice versa.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Sound Control
DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press DBB on the remote to enable/disable
DBB feature.
Basic Functions
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote repeatedly to select:
CLASSIC, JAZZ, ROCK, POP or FLAT (for DVD:
NORMAL, CONCERT, DRAMA, ACTION or
SCI-FI).
LOUDNESS
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press LOUDNESS on the remote to enable or
disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
Volume control
Press VOLUME -/+ (VOL +/- on the remote
control) to increase or decrease the volume
level.
➜
"VOLUME XX" is displayed on the display
panel. "XX" denotes the volume level.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the front panel of the DVD player.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Dimming the display screen
●
Press DIM repeatedly to select different levels of
brightness for the display screen.
19
Advertisement
Table of Contents
