Tuner; Tuning To Radio Stations; Programming Radio Stations; Autostore: Automatic Programming - Philips MCM277/05B User Manual

Usb micro hi-fi system
Hide thumbs Also See for MCM277/05B:
Table of Contents

Advertisement

Tuning to radio stations

1
Press SOURCE once or more to select
TUNER (or TUNER on the remote control)
2
Press TUNER on the remote control
repeatedly to select your desired waveband, FM
or MW
Display shows:
waveband and if programmed, a preset number
3
Press and hold 4 / ¢ until SEARCH
appears
The radio automatically tunes to a station
with sufficient reception. Display shows SEARCH
during automatic tuning
FM: If a station is received in stereo,
shown
FM: When you are receiving an RDS station,
is shown
4
Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press 4 / ¢
briefly and repeatedly until you have found
optimal reception.
, radio station frequency,
is

Programming radio stations

You can store up to a total of 40 radio stations
(FM and MW) in the memory, manually or
automatically (Autostore).

Autostore: Automatic programming

Automatic programming will start from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press the 3 / 4 buttons once or more to select
the preset number where programming should
start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold PROG until AUTO appears
flashes
Available stations are programmed: RDS
stations followed by FM stations, MW stations
(See RDS)
After all stations are stored, the last preset
station will then be played

Manual programming

1
Tune to your desired station (see Tuning to
radio stations)
2
Press PROG to activate programming
flashes
3
Press 3 / 4 to allocate a number from 1 to 40
to this station.
4
Press PROG to confirm
Display shows the preset number, waveband
and the frequency of the preset station
5
Repeat steps 1-4 to store other stations
You can erase a preset station by
storing another frequency in its place

To listen to a preset station

Press the 3 / 4 buttons once or more until the
desired preset station is displayed.

Tuner

19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm277/05Mcm277

Table of Contents