Table of Contents
Advertisement
USB
1
Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance)
2
Press SOURCE once or more to select USB
(or USB on the remote control)
➜
The icon
– NO AUDIO appears if no audio file is found in
the USB device
3
Play the USB's audio files as you do with the
albums/tracks on a CD (See CD)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
– File names or ID3 tags will be displayed as --- if
they are not in English.
22
appears
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your MCM277
1
Check the external device has been properly
connected (See Installation, Connecting an
additional appliance)
2
Press SOURCE once or more to select AUX
(or AUX on the remote control)
3
To avoid noise distortion, turn down the volume
on your external device
4
Press the PLAY key on the connected device to
start playback
5
To adjust the sound and volume, use the sound
controls on your external device and the
MCM277
AUX
Advertisement
Table of Contents
