Table of Contents
Advertisement
Switching on/off the set and
selecting functions
1
To switch on, press STANDBY-ON/ ECO
POWER or SOURCE on the set (or y on
the remote control)
➜
The set switches to the last source selected
OR
On the remote control, press the source button
(e.g. USB, CD, TUNER, AUX)
2
When the set is on, press STANDBY-ON/
ECO POWER to switch off (or y on the
remote control)
3
To select your function, press SOURCE once
or more on the set (or USB, CD, TUNER,
AUX on the remote control)
Helpful hints:
– You can also switch on the set by pressing
CD OPEN • CLOSE ç
Switching between Standby and
ECO POWER mode
1
When the set is switched off, press and hold
STANDBY-ON/ ECO POWER to switch
between Standby and ECO POWER mode (or
y on the remote control)
In ECO POWER mode (power-saving mode):
➜
ECO PWR scrolls on the display
➜
The display is switched off
➜
The Red indicator lights up
In Standby mode:
➜
The clock is displayed
Basic Functions
Helpful hints:
– In the standby/Eco power mode, the tone, sound
settings, tuner presets and the volume level (up to
a maximum volume level of 20) will be retained in
the set's memory.
Auto-standby
When the set has reached the end of CD
playback and remains in the stop position for
more than 15 minutes, the set will switch off
automatically to save power.
Volume control
Volume adjustment
●
Adjust the volume by using the VOLUME
rotary on the set or by pressing VOL +/- on the
remote control
➜
VOL and the actual value (between 1 and 31)
are displayed
➜
VOL MIN is the minimum volume level
➜
VOL MAX is the maximum volume level
MUTE
You can temporarily switch off the sound
without switching off the set.
1
Press MUTE on the remote control to switch
off the sound
➜
MUTE appears. Playback continues without
sound
2
To switch on the sound, you can:
– press MUTE again;
– adjust the volume controls;
– change source
13
Advertisement
Table of Contents
