Assembly And Operation; Maintenance; Operating Instructions - Worx WX80RS Original Instructions Manual

Saw with moderate pressure
in order to achieve optimal and
precise cutting results
Wood
Aluminium
Metal
Particle board
Plastic
Incorrect
Correct
TPI
Teeth per inch
Reciprocating saw

OPERATING INSTRuCTIONS

NOTE: Before using the tool, read the
instruction book carefully.
Always wear a dust mask.
INTENDED USE:
The machine is intended for sawing wood,
plastic, metal and building materials while
resting firmly on the workpiece. It is suitable
for straight and curved cuts.

ASSEMBLY AND OPERATION

Action
Tool-less blade fitting
On/Off operation
Variable speed control
Wood cutting
Metal cutting
Plastic / Aluminum cutting
Flush cutting
Pivoting blade foot
adjustment
Pocket cutting
(soft materials only)
WORK HINTS FOR YOuR
RECIPROCATING SAW
If your power tool becomes too hot, set the
speed to maximum and run a no load for 2-3
minutes to cool the motor.
Always ensure the work-piece is firmly held or
clamped to prevent movement.
The blade guard must be held firmly against
the material being cut to reduce saw vibration,
blade jumping and blade breakage.

MAINTENANCE

Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional
Figure
See Fig.A
See Fig.B
See Fig.C
See Fig.D1
See Fig.D2
See Fig.D3
See Fig.E
See Fig.F
See Fig.G
EN
9