Technical Data; Assembly And Operation - Worx AXIS WX550 Manual

1. ON/OFF SWITCH
2. LOCK-OFF BUTTON
3. HAND GRIP AREAS
4. PIVOT RELEASE BUTTON
5. MOTOR COVER
6. PENDULUM FUNCTION CONTROL
7. PROTECTION FINGER
8. LED WORK LIGHT (SEE FIG. H)
9. BLADE HOLDER
10. FOOT PLATE
11. BASE PLATE
12. BOTTOM PLATE
13. BATTERY PACK *
14. BATTERY PACK RELEASE BUTTON*
*Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX550 WX550.9 (5-designation of
machinery, representative of Saw)
Rated voltage
Charger voltage
No load speed
Stroke length
Cutting capacity
Wood
Jigsaw
PVC pipe
mode
Steel plate
Wood
Rep saw
PVC pipe
mode
Steel pipe
Machine weight
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Li-Ion multi-purpose saw
WX550 WX550.9
20V Max**
100-240V~50/60Hz /
3000/min
20mm
50mm
50mm
4mm
100mm
127mm
76mm
1.9kg 1.5kg
ACCESSORIES
Charger
Battery Pack
Wood cutting jig saw blade
Metal cutting jig saw blade
Aluminum cutting jig saw blade
Wood cutting rep saw blade
Bottom plate
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is 2 saws in 1 tool with rep saw and jig
saw function, intended for sawing wood, plastic, metal
and building materials while resting firmly on the
workpiece. It is suitable for straight and curved cuts.

ASSEMBLY AND OPERATION

ACTION
BEFORE OPERATION
Removing the battery pack
Charging the battery pack
Installing the battery pack
Working mode adjustment
Position I worked as a jigsaw.
Position II worked as a reciprocating saw.
NOTE: Select the blade best
suitable for the working mode for
better cutting performance (special
reciprocating saw blade not included).
WARNING!
• To avoid being pinched, keep
hands away from the hinge when
changing positions.
• To avoid tool being turned on
accidentally, make sure keep your
hands away from the lock-off button.
• Before operation, make sure the pivot
release button is locked into position.
WX550 WX550.9
1 /
1 /
1 1
1 1
1 1
1 1
1 1
FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig.
B1-C4
EN
9