Operation - Detecto PS-7 Owner's Manual

The membrane keyboard is not to be operated with pointed objects (pencils,
pens, fingernails, etc.). Damage to keyboard resulting from this practice will
NOT be covered under warranty.
Turn the Scale On
Press the ON/OFF key to turn the scale on. The scale will display
selected weighing units.
Change the Weighing Unit
Press the UNIT key to alternate between the selected weighing units.
NOTE: Multiple weighing units must be enabled during configuration for this function to be
operational.
Weighing
Place the item to be weighed on the scale tray, wait a moment for the scale display to stabilize
and then read the weight.
To Zero the Weight Display
To zero the weight display, press the TARE key and continue. Note that the scale will zero (Tare)
until the full capacity of the scale is reached.
Display Backlight
The PS-7 is equipped with a back lit display. The display backlight will be turned on during
weighing and will automatically turn off 5 seconds after the weight has been removed from the
scale.
Enable Backlight
To turn the backlight ON, press the TARE key and hold for 3 seconds. The scale will beep
indicating the backlight has been turned ON.
Disable Backlight
Press the TARE key and hold for 3 seconds. The scale will beep indicating the backlight has
been turned OFF.
NOTE: The backlight mode is stored in memory and will restored when the scale is switched off
and back on again.

OPERATION

8528-M303-O1 Rev D  PS-7
88888 then change to the
5