Download Print this page
Detecto PS30 Owner's Manual
Detecto PS30 Owner's Manual

Detecto PS30 Owner's Manual

Digital portion scale

Advertisement

Quick Links

MODEL PS30
DIGITAL PORTION SCALE
OWNER'S MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the PS30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Detecto PS30

  • Page 1 MODEL PS30 DIGITAL PORTION SCALE OWNER’S MANUAL...
  • Page 2: Table Of Contents

    INTRODUCTION TABLE OF CONTENTS Thank you for purchasing our DETECTO Installation …………………..………………. 1 Model PS30 Digital Portion Scale. This manual Display Annunciators ………..…..…………. 2 will guide you through the installation, and Key Functions ………………..…..…………. 3 operation of your scale. Please read it Operation …..………….…………………..…...
  • Page 3: Installation

    7. Turn the scale over (display facing up) and press the ON/OFF key. 8. If the display turns on, the batteries have been installed correctly. If not, remove the battery cover and check for one or more improperly positioned batteries. 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 4: Display Annunciators

    When the low battery indicator is displayed, the operator should replace the batteries or remove the batteries and plug in the 9-15VDC adapter. 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 5: Key Functions

    (tare) until the full capacity is reached. The membrane keypad is not to be operated with pointed objects (pencils, pens, fingernails, etc). Damage to the keypad resulting from this practice will NOT be covered under warranty. 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 6: Configuration

    3. Press the UNIT key to toggle between: Enable (display will change to ) or Disable (display will change to 4. Press the TARE key and then the UNIT key 3 times. The display will change to 5. Proceed to (AUTOMATIC SHUTOFF). 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 7 2. Press the TARE key to begin selection of the scale capacity. The display will change to show 3. Press the UNIT key to toggle through the selections; 4. When the desired capacity is displayed, press the TARE key. The display will change to show 5. Proceed to (BUZZER). 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 8 , press the UNIT key. The display will change to show 2. Press the TARE key to save the settings. 3. The scale will reset and return to the normal operating mode. 4. Configuration is complete. 8528-0408-0M Rev-B PS30 Owner’s Manual...
  • Page 9: Display Messages

    The load cell signal is too low. CARE AND MAINTENANCE The heart of the PS30 Digital Portion Scale is a precision load cell located in the center of the scale base. It will provide accurate operation indefinitely if protected against overload of scale capacity, dropping items on the scale, or other extreme shocks.
  • Page 10: Statement Of Limited Warranty

    DETECTO warrants its equipment to be free from defects in material and workmanship as follows: DETECTO warrants to the original purchaser only that it will repair or replace any part of equipment which is defective in material or workmanship for a period of two (2) years from date of shipment.
  • Page 12 DETECTO 102 E. Daugherty, Webb City, MO 64870 USA Ph: 417-673-4631 or 1-800-641-2008 Fax: 417-673-2153 www.Detecto.com Technical Support: 1-866-254-8261 E-mail: tech@cardet.com 8528-0408-0M Rev B 02/25 8528-0408-0M Rev-B PS30 Owner’s Manual...