Cosco Pronto Manual page 8

6.
Install Headrest Pad
Attach headrest pad by attaching
pad to tabs near the bottom of the
headrest.
Slide the pad over one side of the
a.
head rest, then the other.
7.
Attach the Elastic Straps
From the back of headrest,
attach the elastic straps to the
hooks above the shoulder belt
positioning guides.
8. Attach Headrest to Backrest
With the headrest and backrest
facing down, slide the headrest
into the track on the back of the
headrest.
a.
Lift headrest adjuster lock up and
pull headrest down into a lock
position.
13
4358-6864 Can Pronto ENG.indd 15-16 4358-6864 Can Pronto ENG.indd 15-16
9. Install Backrest Pad
Slide backrest pad onto one side
of the backrest. Pull pad tight
and slide the pad over the other
side of backrest.
10. Expose the Backrest Hole
Hold the rectangular shaped flap
on the rear of the seat base pad
down to expose the backrest
hole.
11. Attach Backrest to Seat
Base
With the backrest laying flat
(horizontal), insert the hook
on the backrest into the large
opening on the back of the
seat base. Make sure the seat
base pad does not get caught
between the moving parts.
The backrest may not connect
properly if the pad is in the
way.
12.
Rotate Backrest Up
Rotate backrest all the way up
into the locked position. In the
locked position, the backrest will
remain upright.
Tuck backrest hole flap under
the backrest pad.
14
1/13/16 2:29 PM 1/13/16 2:29 PM