Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips DC146/79 User Manual

Basic Functions

STANDBY-ON
MIC RO S Y STE M DC14 6
iR
CD/CD - R/CD - RW COMPATIBLE
SOURC E
PRESE T
DOCK
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY -ON 2 or SOURCE
(POWER on the remote control).
➜
The system will switch to the last selected
source.
●
Press DISC, iPOD, TUN or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON 2 on the system (or
POWER on the remote control).
To switch the system to Eco-power
standby mode
●
Press and hold STANDBY -ON (POWER on
the remote control) for more than 2 seconds.
➜
The backlight for clock display is dim.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
10
VOL
TUNING
REPEAT DBB
VOL

Adjusting volume and sound

1
Press VOL +/- to adjust volume.
➜ Display shows the volume level: VOL and a
number from 0-32.
2
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
3
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜
Playback will continue
without sound.
●
To activate sound
reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.
OK
MUTE