0.3 mm thickness Operating conditions 0 … +40 °C, 20 … 90 % RH Delivery contents 1 x coating thickness tester PCE-CT 65 5 x calibration plate foil 1 x calibration plate iron 1 x calibration aluminium 1 x software CD-ROM 2 x 1.5 V AAA battery...
It only needs to be installed on your computer and be started afterwards. The PCE-CT 65 can then be connected to the computer using the USB cable. After this, the instrument needs to be started. If the device is recognized by the computer,...
Choose the calibration that is to be performed, using the arrow keys and confirm your choice with the “Select” key. After this, you need to place the PCE-CT 65 on the calibration plate (make sure it is the right one) and the calibration will be made automatically.
Page 24
PCE Instruments contact information Germany France Turkey PCE Deutschland GmbH PCE Instruments France EURL PCE Teknik Cihazları Ltd.Şti. Im Langel 4 76, Rue de la Plaine des Bouchers Halkalı Merkez Mah D-59872 Meschede 67100 Strasbourg Ataman Sok. No.:4/4 Deutschland France Türkiye...
Need help?
Do you have a question about the PCE-CT 65 and is the answer not in the manual?
Questions and answers