Projector - Eiki EK-620U Manual

2-1. Projector

OSD menu : SETUP >Communications> LAN
DHCP : OFF (direct connection) / ON (Multi connections)
IP Address :
Subnet Mask :
Default Gateway :
Do not need to change.
<NOTE>
When a DHCP server exists in the connected network, it assigns an IP address to
the projector and the computer automatically.
If DHCP server does not exists, set up IP Address, Subnet Mask and Default Gateway
manually.
DHCP : Please check with the network administrator.
2-2. Select the Apply→YES to confirm the settings, and then
wait until finished.
4