Table of Contents
Advertisement
【 General 】
Projector Output Resolution (Default: WUXGA)
・Select the native resolution of the projector.
Connect Setting (Default: 192.168.0.100)
・Connect to the shown IP address.
Function Settings
・Reset All:
Reset all settings to default value.
This function is not available after pressed the 【 Warp 】 【 Edge Blending 】 or
【Black Level 】.
・Reconfigure:
It can apply saved settings from AP to projector.
The button will enable after opening a saved file and connecting to the projector
by AP.
10
Advertisement
Table of Contents
