Installation
Installing FM antenna
WARNING:
– Never make or change connections when
the power supply is switched on.
WAK3300 comes with a pigtail FM antenna.
1
Extend the pigtail antenna
2
Shift the antenna to different positions for opti-
mal reception (as far away as possible from the
TV, VCR or other radiation sources)
3
Fix the end of the pigtail to the wall Using AC
power
22
Using AC power
1
Make sure all connections have been made be-
fore switching on the power supply
2
Connect the AC power cord to the wall socket.
This switches on the power supply
When the set is switched to standby, it
is still consuming some power. Remove
the power plug from the wall socket to
disconnect the set from the power supply
completely.
The rating plate is located at the back-
side of the set
For users in the U.K.: please follow the
instructions on page 2.