is located
b. Set the Encryption key :
b1. Enter the Encryption key (WEP orWPA)
using the alphanumeric keys if you have al-
ready set an Encryption key for your network
or
Press the navigation controls 3 or 4
repeatedly to select a letter, digit or symbol
b2. Press OK to confi rm
c. Select Auto (DHCP)
Helpful hint:
– You can also select Static IP and assign an
IP address as prompted using the alphanu-
meric keys.
d. Select No when the Enable Proxy Serv-
er screen appears
e. Select Yes to apply the setting
The WAK3300 will be restarted
The main menu will appear when
WAK3300 is connected to the UPnP
server
4
To select another network
a. press HOME to enter the main menu
b. press the navigation controls 3 or 4 and É
to select Setting
c. Use the navigation controls 3 or 4 and É
to select Network followed by Quick
Setup
The following will be shown on the display:
Philips Music Center
UPnP Music Server
d. Press the navigation controls 3 or 4andÉ
to select UPnP Music Server
The Select Network screen appears
Searching... appears when the set is
searching for available networks
The list of networks appears
5
Follow the above-mentioned Step 3
If you are using a wired Access Point
1
On the WAK3300, press the navigation controls
3 or 4andÉ to select UPnP Music Server
Wired Ethernet will appear at the bot-
tom of the screen
2
Press É to enter the setup menu of Wired
Ethernet
a. Select Auto (DHCP)
b. Select No when the Enable Proxy Serv-
er screen appears
c. Select Yes to apply the setting
The WAK3300 will be restarted
The main menu will appear when the
WAK3300 is connected to the UPnP server
Installation
21