Placing WAK3300
Before you decide where and how to place the
WAK3300, take note of the following:
– Install the set near the AC outlet
or where the AC power plug can be
reached easily.
– Avoid installing the set between thick walls.
The WAK3300 and Philips Wireless Music
Center/a UPnP-enabled device should never be
blocked by 2 or more walls.
– Avoid placing the set close to large metal ob-
jects.
– Keep the set away from sources of interfer-
ence (such as microwave ovens, DECT phones,
bluetooth devices, cordless phones and other
Wi-Fi products, etc.)
Setting up the system
Connecting to power supply
1
a. Place the WAK3300 beside the Philips Wire-
less Music Center in order to connect to it.
To connect to a UPnP-enabled music server
through an Ethernet cable, connect the Ether-
net cable to the Ethernet ports on WAK3300
and the Access Point
b. Connect the WAK3300's power cord to a
wall outlet
Select languages
1
Press the navigation controls 3 or 4 and 2 to
select your desired language
Set clock
1
Press 3 or 4 and É to select either the 24-
hour or 12-hour clock
2
Press 3 or 4 and É to select current day of
the week
3
Press 3 or 4 and É to select hour or minute,
and pressÉ to confi rm.
The following will be shown on the display
Philips Music Center
UPnP Music Server
Helpful hint:
– If you have selected the 12-hour clock, press
3 or 4 and É to select AM or PM.
Installation
19