Preparation; Using The Remote Control; To Replace The Remote Control's Battery; Using The Navigation Controls - Philips WAK3300/12 User Manual

Preparation

Using the remote control

IMPORTANT!
– Remove the protective
plastic tab before using
the remote control.
– Always point the
remote control directly towards the IR
sensor on the set you wish to operate.

To replace the remote control's battery

1
Press and hold 1 as indicated
2
Pull out the battery tray at 2 simultaneously
3
Remove the old battery and put in a new
CR2025 battery
4
Put back the battery tray
CAUTION!
– Remove the battery when it is exhausted
or when the remote control will not be
used for a long time.
– Batteries contains chemical substances,
hence they should be disposed of
properly.
16
1
2
3
Using navigation controls
When selecting options on the screen of the set,
you often need to use the navigation controls
1 /4/3/É
1
Press 4/3 to highlight an option
2
Enter its submenu or select a checkbox by press-
ing É
3
Press 1 to return to the previous option list
4
Press OK to confi rm