Device Name; Usb Sharing; Location And Time Zone; Language - Philips Streamium MCi8080/12 User Manual

2
Connect MCi8080 as you did in the
first-time setup (see 'First-time setup'-
>'Connect to home Wi-Fi/wired
network').

Device name

In [Device name], you can name/rename your
MCi8080. On a connected UPnP server/client,
the MCi8080 can be found as named.
1
From Home screen, go to [Settings] >
[Network settings] > [Device name].
2
In [Device name], press / to select the
entry location; press / repeatedly to
select desired letters.

USB sharing

When you connect MCi8080 to home Wi-
Fi/wired network, the HDD connected to
MCi8080 can work as a shared disk of the
network. Contents on the HDD can be played
or shared on computers or UPnP devices that
are also connected to the network.
• To permit or prohibit the sharing, go
to [Settings] > [Network settings]
> [USB sharing]. Press OK to turn
on or off the sharing.

Location and time zone

After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
According to the selected location and time
zone, MCi8080 can
• Set clock automatically over the
Internet (see 'Settings'->'Date and
time');
• Pre-load preset Internet radio
stations automatically.
60 EN

Language

After the first-time setup, you can change the
language selection in [Settings] > [Language].

Device information

From the home screen, go to [Settings] >
[Device ID and information]. You can learn
about information about MCi8080, including
model number, name to be shown on a UPnP
server/client, software version and network
settings.

Check for software upgrades

On the MCi8080, you can check for software
upgrades. After you click to agree to the terms
and conditions, the downloading and installation
of new upgrades start automatically.
1
Ensure that MCi8080 is connected to the
Internet.
2
From Home screen, go to [Settings] >
[Check for software upgrades].

Demo mode

After the first-time setup, you can view the
demo again.
1
From Home screen, go to [Settings] >
[Demo mode].
»
Demo play starts.
2
To exit the demo play, press .
»
The unit is switched to Eco standby.