Sleep Timer; Date And Time - Philips Streamium MCi8080/12 User Manual

To play a song or Internet radio station as
the next alarm sound
1
Ensure that you have selected [Music] in
the Step 3 above;
2
Before you turn off MCi8080, or switch
MCi8080 to active standby,
• Go to [Media Library], and select
and play the desired song;
• Or, go to [Internet Radio], and tune
to the desired station.
Use the alarm
At the set alarm time, music/Internet radio
plays as desired, or the buzzer sounds.
Note
•
The alarm sounds even if you have switched
MCi8080 to active standby or Eco standby.
•
The buzzer sounds instead, if MCi8080 fails to
connect to a music library or an Internet radio
station.
•
MCi8080 is unmuted if it has been muted.
•
The alarm sounds in a higher volume if the
volume level is lower than minimum.
To snooze the alarm
• Press any button on the unit or
the remote control (except for the
volume buttons).
»
The alarm sounds again 15
minutes later. The alarm icon
remains.
To stop the alarm
• Press and hold
»
The alarm is stopped. The alarm
icon disappears.
»
The alarm sounds again next day.
To turn off the alarm
• Go to [Settings] > [Clock settings]
> [Alarm]. Select [Alarm off] and
press OK on the remote control.
58 EN
or .

Sleep timer

With the sleep timer, you can have MCi8080
turned off automatically after the set timer
duration.
To set the time duration
1
From the home screen, go to [Settings] >
[Clock settings] > [Sleep timer].
• Or, press SETTINGS on the remote
control to enter [Settings].
2
Select an option. Press OK to turn it on.

Date and time

The date and time can be set automatically or
manually.
Automatic setting
For automatic clock setting, use the online
service over the Internet, or use the time
signal from FM RDS radio.
Through the online service over the Internet
1
Turn on the unit, if necessary.
• Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
2
From Home screen, select [Settings] >
[Clock settings] > [Date and time].
• Or, press SETTINGS on the remote
control to enter [Settings].
3
In [Date and time], select [Current date
and time] > [Automatic (Internet)].
»
The unit starts auto time setting over
the Internet.
»
A message appears when the setting
is done.