Network Settings; Setup Network - Philips Streamium MCi8080/12 User Manual

1 3
Automatic (Internet)
Automatic (RDS)
Manual
Tip
•
According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
•
To check and change current location and time
zone, go to [Settings] > [Location and time
zone].
Through time signals from FM RDS radio
1
On the unit, turn on the FM radio, if
necessary.
• Ensure that the FM antenna is
connected properly CA-MCI8080-
Connect the FM antenna (see
'Connect the FM antenna' on page
23).
2
On the first location for preset stations,
store an FM RDS station that transmits
time signals.
3
From Home screen, select [Settings] >
[Clock settings] > [Date and time].
• Or, press SETTINGSon the remote
control to enter [Settings].
4
In [Date and time], select [Current date
and time] > [Automatic (RDS)].
»
The unit searches for the first preset
station automatically.
»
The time is set according to time
signals from the station.
Manual setting
1
Turn on the unit, if necessary.
2
From Home screen, select [Settings] >
[Clock settings] >[Date and time].
• Or, press SETTINGSon the remote
control to enter [Settings].
3
In [Date and time], select [Current date
and time] > [Manual].
4
To enter date and time,
• Press or
location;
• Use the alphanumeric buttons to
enter desired digits;
• Press OK to confirm.
• You can also press
repeatedly, or press and hold
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1
Follow Step 1-2 under "Manual setting".
2
In [Date and time], go to [Time format]
or [Date format] to select options.

Network settings

Setup network

After the first-time setup, you can change how
MCi8080 connectsto home Wi-Fi/wired network:
• Switch between different connection
methods (wireless or wired,
automatic or manual);
• Switch between different routers.
To do so, do the following:
1
From Home screen, go to [Settings] >
[Network settings] > [Setup network].
• Or, press SETTINGS on the remote
control to enter [Settings].
to select the entry
or
or
EN 59