Blade - Pfaff 333-712/02 Adjustment Manual

Adjustment
13

Blade

.05.09
O Unscrew the blade 1 (screws 2).
O Move the needle bar to b.d.c. and activate the field core 3.
O Turn the handwheel in the direction of rotation until the thread catcher tip 4 is at the
O Align the blade 1 laterally according to the rule (see arrow).
O Tighten the screws 2.
O Check that the back of the thread catcher is not twisted at the blade edge by turning the
O Readjust the thread catcher 4 if necessary, see chapter 13.05.07 Aligning thread catch-
24
Rule
If the rear edge of the thread catcher cutout is 1 mm in front of the blade edge, the left
blade edge should be flush with the thread catcher edge (see arrow in circle).
4
1
Fig. 13 - 19
same level as the blade edge.
handwheel.
er laterally.
3
2