Promatic Hunter Wobble Set Up And Operating Instructions Manual page 9

Promatic, Inc.
Inspect the throwing strip for uneven wear. Uneven wear can re-
•
sult in broken targets and is an indication that the throwing plate
height needs to be adjusted.
Inspect toggle switch and fire button covers for tearing and dry
•
rot. Replace items as needed to prevent moisture from damaging
electrical components in the housing.
Inspect nuts and bolts to insure nothing is loosened or over-
•
tightened.
Lubricate all moving parts with a dry lubricant (i.e. silicone).
•
Grease the grease certs inside the carousel. DO NOT OVER
•
GREASE. If over greased, the grease will run onto the carousel
plate and cause erratic targets.
888.767.2529
Page 9