Introduction; Disclaimer Of Liability; Important Notices - SubSurface Instruments PL-TT Series User Manual

Congratulations on the purchase of your new PL-TT Locator. The PL-TT Locator is specially designed to detect
buried utilities. This device may detect buried power cables, CATV cables, gas and water pipes, sewer lines,
telephone cables, fiber optic cables with sheath, sondes, inspection camera transmitters.
The basic principle of the locator's operation is as follows:
The Transmitter emits a signal, the Receiver detects the signal. You can locate the relative position of the
buried utility, sonde or camera by following the tracing signal.
To help ensure the best locating results, please read & understand the manual in its entirety before using
the product.
SubSurface Instruments, Inc. Shall not be liable to Distributor, Re-Seller, or any other person for any
incidental, indirect, special, exemplary or consequential damages, or injury of any type whatsoever, and
caused directly or indirectly by Products sold or supplied by SubSurface Instruments, Inc..
Electric shock hazard:
WARNING!
• Tool is designed to detect electromagnetic field emitted from Camera Sondes and buried metallic utilities.
There are buried cables, pipes, and utilities this instrument CANNOT detect.
• LOCATING is not an exact science. The only certain way to be sure of the existence, location, or depth of
buried utilities is to carefully expose (dig up) the utility.
• De-energize any circuits in or around the work area.
• Do not expose tool to rain or moisture.
• Use tool only for intended purpose as described in this manual. Failure to observe these warnings could
result in severe injury or death.
04
SERIES
i
ntroduCtion
d o l
isClaimer f iability
i n
mportant otiCes
www.ssilocators.com