Absolute Signal Strength; Gain Change Indicator; Low Battery - SubSurface Instruments PL-TT Series User Manual

The PL-TT Locator r
of the r
numerical digits located at the top of the LCD display. The measurement
ranges from 0 (weak) to 99 (strong) signal strength. Absolute Signal
Strength is independent of the GAIN setting or meter reading. It gives the
operator information about the actual amount of signal being radiated
from the conductor and received by the r
The Absolute Signal Strength will not be displayed if the gain is too high
or too low. Adjust the GAIN to move the meter reading to mid-scale. The
numerical display will change from '--' to a valid measurement.
The GAIN up and down buttons are used to increase and decrease the
gain in small amounts.
The Gain is represented by a
when the unit is in Direct Mode, Inductive Mode or t
Mode.
The Gain is represented by a
graph
The PL-TT Locator will indicate low battery condition by displaying the low
battery icon on the LCD screen.
www.ssilocators.com
a
bsolute
provides the operator with a direct measurement
eceIver
's signal strength. The measurement is displayed with two
eceIver
g
ain
Side View
when the unit is in Ferrous Metal Detection Mode.
Overhead
View
s s
ignal trength
.
eceIver
C i
hange ndiCator
solid line on the top of the bar graph
ransmItter
missing line on the bottom of the bar
l b
oW attery
Induction
Overhead
View
Gain Indicator
11
SERIES