Removing The Pressure Plate Insert Or Air Fry Grate - Bella PRO Series Instruction Manual

Removing the Pressure Plate Insert or Air Fry Grate

Where possible, leave the hot pressure plate insert or air fry grate in place until the unit has
completely cooled. For recipes where switching the plate or insert is needed during the cooking
process, always use the included plate handle. This handle is designed to conveniently allow you
to insert and remove the plates even when they are hot.
1. Firmly grasp the plate handle with
the extended knuckle guard facing down.
(Figure 3)
2. Connect the end of the handle
to the protruding metal tab on the plate.
Once secure, press the button on the left
to lock. (Figure 4)
3. When the handle is securely locked
to the plate, press the release tab
at the top of the plate. (Figure 5)
4. With the handle, carefully lift the plate out
of the unit and place on a sturdy, flat, heat
resistant surface.
5 To remove the handle from the plate, press
the button on the right side of the handle
and pull the handle out. (Figure 6)
6. Allow the plate to fully cool before moving
or cleaning.
7. See Figure 7 for where plates clip
in to the unit lid.
Figure 3
Figure 5
Figure 7
18
Figure 4
Figure 6