More Features; Deepsleep Mode; Connect New Earbud; Switch Controls - Plantronics BackBeat PRO 5100 User Manual

More Features

DeepSleep mode

Connect new earbud

Switch controls

If you leave your earbuds powered on but out of range of your paired device, they conserve power
by entering DeepSleep mode after 90 minutes.
To exit DeepSleep mode, power on each earbud.
If you lose one of your earbuds and order a replacement, connecting your new earbud to your
existing earbud takes a few easy steps.
Delete "PLT BBPRO5100" and "PLT BBPRO5100_L" from your phone's Bluetooth device list.
1
PLT BBPRO5100
PLT BBPRO5100_L
Click and hold each earbud for 2 seconds to power on.
2
L
:02
click click
Tap the left earbud 3 times very quickly within 1 second to connect. LED flashes red and white.
3
Repeat on the right earbud.
When successfully connected, both earbuds flash white 3 times.
L
x3
tap tap
After connecting, your earbuds automatically go into pair mode. Your right earbud flashes red and
4
white. To pair to your phone, select "PLT BBPRO5100" in your phone's Bluetooth settings.
LEDs turn off and you hear "pairing successful" when the right earbud is paired.
PLT BBPRO5100
Select "Pair" or "OK" in your phone's Bluetooth Pairing Request popup window to pair the left
5
earbud.
You hear "pairing successful" when the left earbud is paired.
PAIR
Your right earbud is the primary earbud by default. It pairs to your phone/audio device and the left
earbud automatically connects to the right.
If your prefer having your main earbud controls on your left side, use the Switch Primary Earbud
feature in the BackBeat app to make the left earbud the primary earbud. This moves the
R
:02
R
x3
11