System Check Display; When Driving On Snowy Roads Or In Other Bright Environments - Toyota Prius+ Owner's Manual

STEP 3
Press and hold the "SET" switch.
STEP 4

System check display


After switching the "POWER" switch to ON mode, "welcome to PRIUS +" is
displayed while system operation is checked. When the system check is
complete, the normal screen will return.


When driving on snowy roads or in other bright environments

When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding "" on the brightness control
button.
Pressing "" on the brightness control button or turning the "POWER" switch
off will cause the brightness level to revert to the original level.
 Head-up display
 The head-up display may seem dark and hard to see when viewed
through sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
 When the head-up display is turned off, it will remain off even if the power
switch is turned to ON mode after the power switch has been turned off.
 When the 12-volt battery is disconnected
The head-up display settings will be reset.
PRIUS +_OM_OM47821E_(EE)
2-2. Instrument cluster
Press the display position adjust-
ment switch to select ON or OFF.
2
259