If The Tire Is Inflated To More Than The Specified Air Pressure; The Valve Of A Tire That Has Been Repaired; Note For Checking The Emergency Tire Puncture Repair Kit - Toyota Prius+ Owner's Manual

5-2. Steps to take in an emergency


If the tire is inflated to more than the specified air pressure

Disconnect the hose from the valve.
STEP 1
STEP 2
Disconnect the hose from the valve, remove the air release cap
STEP 3
from the hose and then reconnect the hose.
STEP 4 Turn the compressor switch on and wait for several seconds, and
then turn it off. Check that the air pressure indicator shows the
specified air pressure.
If the air pressure is under the designated pressure, turn the com-
pressor switch on again and repeat the inflation procedure until the
specified air pressure is reached.

The valve of a tire that has been repaired


After a tire is repaired with the emergency tire puncture repair kit, the valve
should be replaced.


Note for checking the emergency tire puncture repair kit

Check the sealant expiry date occasionally.
The expiry date is shown on the bottle. Do not use sealant whose expiry
date has already passed. Otherwise, repairs conducted using the emer-
gency tire puncture repair kit may not be performed properly.
510
PRIUS +_OM_OM47821E_(EE)
Install the air release cap to the end of the
hose and push the protrusion on the air
release cap into the tire valve to let some
air out.