Before You Start; Attach The Strap - Canon 15x50 IS ALL WEATHER Instructions Manual

Image stabilizer
Hide thumbs Also See for 15x50 IS ALL WEATHER:
Table of Contents


• Do not replace or load the batteries while the binoculars are wet. Wipe off any
water droplets from the binoculars first.
• Battery Pack BP-B1 (sold separately) can be used as an external power source.
However, it is not water-resistant.
Battery Life (Continuous Use)
Size-AA alkaline batteries
Size-AA lithium batteries
Size-AA Ni-Cd batteries
• Size-AA manganese batteries are not recommended due to their low energy.

Before You Start

25˚C / 77˚F
2 hr. 30 min.
8 hr
2 hr. 30 min.

Attach the strap.

Make sure that the strap does
not loosen at the clasp when
you pull it.
Load the batteries.
Use a coin to turn the battery
chamber cover by 90˚ as shown
by the arrow. Then open the
Load the batteries in the correct
+ and – orientation as shown on
the battery cover.
Check that the lamp lights.
Press the Image Stabilizer
button and check that the lamp
–10˚C / 14˚F
3 hr. 30 min.
1 hr. 30 min.
(Based on Canon's testing conditions.)
10 min.

Hide quick links:


Table of Contents

This manual is also suitable for:

18x50 is all weatherImage stabilizer 8x25 is

Table of Contents